Description: [Color] Red, white, blue, choose one from three [Power supply] DC12V+/- 10% [Wiring length] 0.6m [Power] 2 (W) [Voltage] 12 (V) [Current] 0.1 (A) [Tools prepared before installation] Please prepare the following tools before starting: 1. Flat head screwdriver 2. Cross head screwdriver 3. Insulating tape 4. Towel 5. Pliers [Installation Instructions] First, lay a towel next to the trunk logo, and use a flat screwdriver to pry the logo. The purpose of laying the towel is to prevent scratching the vehicle body. 2. Pay attention to peeling off the double-sided adhesive tape from the vehicle body first. When prying, use moderate force and don't use too much force. Slowly pry it off bit by bit, and clean the double-sided adhesive tape on the vehicle logo and vehicle body. 3. Use a cross screwdriver to remove the partition inside the boot. Note that there are clips in some places. Be careful to remove the sound insulation panel to see various lines. 4. Now, install the vehicle logo lamp. The power cord of the vehicle logo lamp passes through one of the vehicle logo positioning holes, passes through the inside of the vehicle compartment, and tears off the single sided adhesive on the back of the vehicle logo lamp. While pulling the wire, stick the vehicle logo lamp to the vehicle body and press it tightly. 5. The vehicle logo light is installed, and now connect to the power supply. The vehicle logo lamp should be connected to the power supply of the rear license plate illumination lamp, so that when the small night light is turned on, the vehicle logo lamp will also be turned on at the same time. Find the power connector for the rear license plate lamp. 6. First unplug the plug, peel a hole at the positive and negative electrodes, expose the wire core, and connect the wire in red to red and black to black. Don't forget to wrap it with insulating tape, and finally plug the plug back in! Replace the tailgate sound insulation panel.
Price: 29.99 USD
Location: Shen zhen
End Time: 2024-10-29T03:37:21.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
Brand: FS
Available Variations
Color: White
Price: 29.99 USD
Available Quantity: 10
Quantity Sold: 0
Color: Red
Price: 29.99 USD
Available Quantity: 10
Quantity Sold: 0
Color: Blue
Price: 29.99 USD
Available Quantity: 10
Quantity Sold: 2
