CHADWICK 12V immobilizer 2.4g dormant lock for car M505

Description: SKU M505 12V immobilizer 2.4g dormant lock for car 2.4G Car directional dormant lock anti-hijacking device immobilizer by technology of Radio Frequency Identification(2.4Ghz & RFID) Main Features: Applicable models: 12V gasoline car Installation location: Connected to the oil pump circuit or ignition switch Product function: Automatic fuel cut-off and flameout or automatic power cut-off and flameout Product features: 2.4GHZ high RF identification technology, easy to install, and stable performance 1. Anti-hijacking(robbery) function mode: (without short circuit ring inserted on the unit) Factory default After receiving the signal, the unit can start the car engine normally. The unit cannot receive the signal for 30-40 seconds, and the buzzer sounds once per second. If the signal is not received for 41 to 50 seconds, it will sound twice per second. Unable to receive signal for 51 to 60 seconds, 3 sounds per second. After 60 seconds, if the signal is not received, the engine will turn off and the buzzer will not sound. 2. Directional dormant lock function mode: (insert short circuit ring on the unit) 1)When the car starts the engine, the unit receives a signal within 25 seconds, the buzzer sounds, and the car starts normally. Within 25 seconds, the unit cannot receive a signal and the engine shut down. 2) When starting the engine for the second time, the unit receives the signal and can start normally. If the unit still cannot receive the remote control signal, the engine will shut down after 20 seconds. 3)Start the engine for the third time (or more), as long as the unit receives the signal, it can start normally. If the unit cannot receive the signal, the engine cannot start, It is not possible to start normally until receiving a signal from the remote control. 4)The remote control signal is no longer sensed midway, and only when the engine is turned off and restarted, the signal needs to be re sensed. 3.New technoloty 2.4Ghz RFID engine lock for 12V vehicle 4. Intelligent NO scan card lock and unlock the car engine automatically 5.Anti-hijacking (Anti-robbery) intelligently 6. Engine circuit cut off intelligently 7.Two thin transmitter 8.The car engine will be locked automatically and could not be started beyond 2 (-8)meter 9.Approch to the car within 2 meter, the engine will automatically unlock 10.You can put the remote inside pocket, the engine will automatically lock and unlock 11.Anti-hijacking mode, intelligent circuit cut off 12.Without the remote, even use the car key can not start the engine 13.Emergency release: if the remote lose or the remote is with low power, press the reset button for 3 times and keep press the button at the third time until the buzzer of the main unit chirp 3 times 14.Very easy to install Specification: Remote control instantaneous working current: ≤ 10mA Remote control standby current: ≤ 3uA Remote control battery specification: CR2032 Remote control frequency: 2.4GHz Operating voltage of the unit: 12V ± 3V Unit standby current: ≤ 18mA Unit control current: ≤ 30A Control box size: 6 x 2.4 x 1.5 cm (L x W x H) Remote Controller size: 5.4 x 2.9 x 0.55 cm (L x W x H) Weight:0.12KG Packing size:160*92*50mm ,50PCS/canton ,canton size:MEAS:41*34*40CM About installation: The product need installed by the Profesionales with Car electrician certificated For 12V DC car (Vehicle) The item without central door lock function ,only control the engine Package Include: 1x Main Control Unit With Wire 2x Remote Control 1x English User Manual M505 FAQ 1. Can this product be used to control 24V trucks? At present, this product can only control 12V products, including cars, motorcycles, etc 2. Is the product easy to install? This product is easy to install. The buzzer and Manual fire alarm activation are well matched, and no wiring is required. Directly connect the red and black power cables, with the black iron (negative) and the red connected to the positive (long-term) of the power supply. Two thick green wires are connected to cut off the two ends of the circuit or oil circuit to be controlled. 3. I connected the positive and negative terminals of the power supply, but how can't I test whether the product relay is on or off? The red and black wires are the power supply terminals of the host, and the relay and buzzer are powered from the green wire. Therefore, at least one of the green wires must have 12V power to work. This is designed considering that the relay cannot work for a long time and consumes ele

Price: 23.99 USD

Location: nanyangshi

End Time: 2025-01-05T08:53:31.000Z

Shipping Cost: 20 USD