Taotronic TT-BA07 Bluetooth 5.0 Transmitter & Receiver Low Latency SB17S

Description: LOW DELAY: aptX Low Latency for High-fidelity Stereo Sound, lag-free content streaming in transmitter mode. Low Latency supported Bluetooth receiver is required. MAKE IT TWO: Upgraded 2-in-1 Bluetooth V5.0 transmitter can be paired with two Bluetooth receivers (like headphones + speakers) simultaneously. Note: aptX Low Latency does NOT support Dual Link mode. ALWAYS ON: TaoTronics Bluetooth 2-in-1 Adapter continuously streams even while charging. Built-in battery for up to 10 hours use - enjoy your favorite wireless content all the time. BLUETOOTH EVERYWHERE: In Transmitter mode, turn a non-Bluetooth TV, PC, CD player, iPod, MP3 / MP4 into Bluetooth transmitter. Receiver mode: Ideal for home or vehicle music streaming sound system. PURE SOUND: aptX audio codec for a richer and deeper sound experience. Listen to CD-like audio quality at no compromise. Plus, 12 + 6 month extended warranty and 24/7 friendly customer service. Control Functions Product Diagram Note: The mode can only be successfully switched after the adapter is turned off for 3 seconds. After the switch, the pairing history of the previous devices will be cleared.LED Indicators Note: For ﬁrst time use, once powered on, the adapter will automatically enter pairing mode. Please follow the instructions below on how to pair.How to Use ChargingConnect the micro-USB end of the charging cable to the charging port of the Bluetooth® adapter.Plug the USB end of the charging cable to a USB charging port or any active USB port.The LED indicator will turn red when charging. It will automatically turn off when the device is fully charged. Note: You can use the adapter while it is charging.We recommend charging the unit for at least 2 hours before using it for the ﬁrst time.Pair in TX mode:Set the TT-BA07 to TX mode and connect it to your audio transmitting device.Place your Bluetooth® audio receiving device within a 3 feet / 1 meter range and set it to pairing mode.Press and hold the Power Button for 5 seconds (LED indicator ﬂashes blue slowly) and tap twice to enter pairing mode (LED indicator ﬂashes red and blue alternately). After approximately 30 seconds, the pairing will be done (LED indicator in solid blue). Note:In order to achieve low latency, please make sure your receiving Bluetooth device also support Qualcomm® aptX™ Low Latency codec, otherwise you may experience noticeable lag between sound and picture.Please do not connect TT-BA07 to an ampliﬁer output in TX mode, which may cause over-voltage and damage the adapter.Pair in RX mode: Press and hold the Power Button of the adapter for 5 seconds (LED indicator ﬂashes blue slowly). It will start pairing 5 seconds after being powered on (LED indicator ﬂashes red and blue alternatively).Activate the Bluetooth® function on your phone and search for the nearby Bluetooth® devices: • For iOS: Settings > Bluetooth® > On • For Android: Settings > Wireless & Networks > Bluetooth®: On > Scan for devicesFind “TaoTronics TT-BA07” in the search results and tap on it to connect. Once connected, the LED indicator will turn solid blue. Note:The adapter enters pairing mode automatically when powered on for the ﬁrst time.The original pairing memory will be cleared after a mode switch. It will automatically start pairing each time it’s powered on.If a PIN code is required for pairing, try 0000 (four zeroes), 8888 (four eights), 1111 (four ones), or 1234.The adapter can remember previously paired devices and will attempt to pair with devices automatically, without going into pairing mode. Pair with two devices at the same time In TX mode: In TX mode, the adapter is able to pair with two Bluetooth® stereo earphones/speakers at the same time.Follow the previous instructions in the “Pairing” section to pair the TT-BA07 with your ﬁrst device.Turn off the Bluetooth® function on your ﬁrst device, tap the Power Button twice to pair and connect to your second device.Turn on the Bluetooth® function on your ﬁrst device. In approximately 30 seconds, the ﬁrst device will automatically connect in. Note:When you pair with two devices, both can play music at the same time.The adapter will automatically re-pair when powered on.In RX mode: In RX mode, the adapter is able to pair with two Bluetooth® devices at the same time.Follow previous instructions in the “Pairing” section to pair the TT-BA07 with your ﬁrst device. Disable the Bluetooth® function on your ﬁrst device. Tap the Power Button twice to pair with the second device.Turn on the Bluetooth® of the ﬁrst device, now TT-BA07 adapter is successfully paired with both devices. Note:Only one device can play music at any time. You have to stop the music on one device to play on the other.The adapter will automatically re-pair when powered on.Care and MaintenanceKeep the adapter away from heat and humidity.Do not expose the adapter to direct sunlight or extreme heat.Do not try to take the adapter apart. It may cause serious damage.Do not drop or knock the adapter on hard surfaces as it damages the interior circuit.Do not use chemicals or detergents to clean the product.Do not scrape the surface with sharp objects.

Price: 8.79 USD

Location: Ontario, California

End Time: 2024-11-15T23:45:00.000Z

Shipping Cost: 0 USD