Underground Wire Locator, F04 Underground Wire Tracer Tone Generator Kit and Pr

Description: Underground Wire Locator, F04 Underground Wire Tracer Tone Generator Kit and Probe with Earphone, Buried Wire Locator Cable Tester for Locating Breakage Cables & Wires Dog Fence CablesDescriptionBatteries2 9V batteries required. (included)Country of OriginChinaPackage Dimensions9.84 x 5.91 x 2.01 inches; 1.01 Pounds[New Upgraded - Underground Wire Tracer] The VXSCAN F04 Underground Wire Locator adopts new transmission and reception technology, which enables quick and accurate location and tracking of buried and hidden wires. This cable locator can also determine the breakpoint and direction of the cable without damaging the insulator on the cable's surface. With this cable tester, you can easily detect and repair broken cables, making the process convenient and efficient.[Wide Range of Applications] F04 Underground Wire Tracer can be used to detect pet fence cables, network communication cables, wall cables, underground irrigation cables and construction area cables, etc. When the battery is in the best condition, wire tracer range-up to 2-3 inch deep and 1000 feet in length. It can effectively meet the detection needs of various environments and is widely used in the field of cable detection.[Anti-jamming Design] The Underground Cable Locator features an anti-jamming design with adjustable transmission power and a sound-receiving controller. This design allows for effective reduction of electromagnetic noise interference through both analog and digital communication. Underground wire tracer with earphones, you can connect the earphone to the receiver to get accurate location in a noisy environment, which can efficiently meet the use of various environmental scenarios.[Easy to Use] How to use Underground Wire Tracer? 1) Turn on the transmitter and receiver by holding down the power button on each device. 2) Press the signal-output search button on the transmitter and adjust the power as needed. 3) Clip the red line of the transmitter onto the cable to be detected. 4) Slowly move the receiver closer to the transmitter until you can hear and judge the sound in search of cables. If the receiver detects an untested cable and sounds, it indicates a short-circuit.[Led Lamp] The Underground wire tracer buried wire locator supports LED lights, which can be turned on in dark environments or at night for better visibility. Meet your working needs in dim environments.[Excellent Service] We provide lifetime friendly customer service. Also, if you encounter any usage or professional problems while using our products, please feel free to contact us. Our team of expert technicians are ready to answer your questions and provide support. VXSCAN products have undergone strict quality inspection and testing before leaving the factory. Please learn how to use them according to the video and instructions before use.WARM TIPS 1: If the line length does not reach the measurable range and the line cannot be detected, please check/operate the following steps first - 1. Check if the battery power is too low. If the battery is low, replace it with a new one please 2. Is the transmit power adjusted to the maximum? If not, you need to adjust the transmit power to the maximum, then slowly turn down the power to locate the line.WARM TIPS 2: Did you make ground stakes by yourself before use? If not, you need to make ground stakes yourself, and the black clip on the transmitter needs to be connected to the ground stakes, which can enhance the signal If you have done all the above steps and still cannot detect the line, please feel free to contact us.WARM TIPS 3: Is the detection range too large and inaccurate? When looking for the cable to be tested, it is necessary to adjust the power of the transmitter and receiver to the maximum, so as to find the cable to be tested conveniently. After finding the cable to be tested, it is necessary to gradually reduce the power according to the test requirements to narrow the detection range and accurately locate the line.Product DescriptionHow to quickly locate hidden wires？When the receiver probe is close to the cable of the passage, it will emit a bibi sound signal, and the buried and hidden wires can be quickly and accurately located and tracked according to the sound.How to identify broken and shorted cables？When the audible signal from the receiver probe stops, there is an open or short circuit in the cable at that location. Determine cable breaks and orientation without damaging cable surface insulation.How to detect the cable under test？The user red clip holds the cable to be tested.Black line clamps the ground stake made of metal rod and inserts it into the earth.How to properly install the battery？You need to organize the battery line and put them on the front of the battery, PLEASE DO NOT put the battery line on top.Adjustable Sound ReceiverAdjustable sound receiver design, which can be adjusted according to the environment and your own needs to change the size of the sound and signal receiving range.External EarphonesEquipped a pair of earphones that can be connected to the receiver earphone jack to improve efficiency in a noisy environment.(Notice: The device cannot detect live cables, so make sure cables are neutral before connecting the device.)

Price: 89.99 USD

Location: Chicago, Illinois

End Time: 2024-10-03T02:08:11.000Z

Shipping Cost: N/A USD