Used Edelbrock VICTOR BIG BLOCK Chevy 24 Degree Cylinder Heads T &D SHAFT ROCKER

Description: Used Edelbrock VICTOR BIG BLOCK Chevy 24 Degree Cylinder Heads. THIS COMBO WAS PUT TOGETHER BY GOODWIN COMPETITIONS OUT OF WISCONSIN. THEY DID THE PORTING AND ECT. THIS WAS ON A 532 CI BBC MOD PULLING TUCK. SO THEY HAVE VERY LITTLE RUN TIME. THE TRUCK BLEW A ROD DURING THE RUN AND SHOT IT OUT THE OIL PAN IN JULY OF 22. THE MOTOR WITH THESE HEADS PRODUCED 1155 HP. THIS IS THE INFO FROM THE BUILDERS WEBPAGE ABOUT THE HEADS. Goodwin CNC Pro Ported Edelbrock 24° Raised Port Chev BB Aluminum HeadsCNC ported masterpieces from the top name in competition research and development. The most powerful 24° standard port height Chev BB head available. 380cc intake runners flow up to 450 cfm. The latest in wet flow technology produces a minimal cross sectional area with max velocity air flow. Full attention is applied to each intake runner, exhaust runner, chamber and bowl area, for the best flowing heads of their class. 119cc chambers can be milled to 110cc. Designed for 4.500″ minimum bore. Assemblies include: • 380cc Raised Port Intake Runners• 108-116cc Chambers• Next Generation of Custom Castings• Most Powerful 24° Chev BB Head Available, Period!• 1150-1200 HP Capable, Flow 500+ cfm CASTING NUMBERS ON THE HEAD IS 6143 AND IN SMALLER NUMBERS IS 1124. T&D SHAFT ROCKERS PART NUMBER IS 66972ALL INTAKE ROCKERS ARE IN GOOD SHAPE WITH 2 DIFFERENT SPARES. INTAKE USES 2 DIFFERENT ONES. 1.85 RATIO. 3&6 ARE THE SAME, 1,2,4,5,7,8 ARE THE SAME. 3 OF THE EXHAUST ROCKERS ARE GOOD SHAPE. 6 HAVE DAMAGE, 1 IS MISSING ROLLER. ALL 6 HAVE DAMAGE TO THE ADJUSTING NUT AND OR THE ALUM AROUND IT. HAVE 1 EXTRA EXHAUST ROCKER, IT IS ONE OF THE DAMAGES ONES. EXHAUST ROCKER PART #16-1563 1.80 RATIO . SOME OF THE BOLTS STILL HAVE SEALANT/LOCKER ON THEM. THE SHAFT ROCKER RAIL HAS SOME SCUFFS AND SCRATCHES. 4 OF THE INDIVIDUAL STANS HAVE LIGHT DAMAGE, SMALL CHUNKS MISSING. SOME OF THE SURFACES WERE CLEANED WITH A RUBBER 3M PAD, BUT DID NOT DO ALL, SO SOME WILL NEED TO BE CLEANED UP STILL. THIS COMES WITH REUSABLE VALVE COVER GASKETS- USED. THIS INCLUDES HEAD STUDS, THEY HAVE SEALANT STILL ON THE STUDS. THE HEADS THEM SELVES HAD SOME CRACKS, ONE ON EACH HEAD. THEY WERE IN THE HEAD BOLT HOLE. THEY WERE PROFESSIONALY WELDED BY A MACHINE SHOP. YOU CAN SEE THE CRACK INSIDE THE HOLE, BUT ITS REPAIED ON THE OUTSIDE. NO WAY TO FILL THE HOLE INSIDE WITHOUT BLOCKING THE STUDS HOLE. (UNLESS LOTS OF MACHINE WORK)THERE IS A TINY CRACK IN THE VALVE SPRING POCKET. BRONZE VALVE GUIDES , MANY OF THEM APPEARED TO HAVE CRACKS IN THEM. THE SHAFT ROCKER SET UP WAS INSTALLED WITH HELI-COILS , A FEW OF THEM PULLED OUT WHEN THE MOTOR BLEW. IT WOULD BE SUGGESTED TO REPLACE ALL HELI-COIL. TITIANIAM VALVES 2.325 / 1.880EXHAUST VALVES FROM THE NAKED EYE APPEAR OK. (SHOULD BE INSPECTED)1 INTAKE VALVE IS GONE, AND A FEW HAVE OBVIOUS DAMAGE (BENT) PAC RACKING VALVE SPRINGS, SOMES WITH 2 SETS, ONE SET HAD 2 RUNS ON THEM, THE OTHER HAVE ABOUT 15. SEE PHOTO FOR THE SPECS OF THE OLDER SET. I TRIED TO TAKE AS MANY PHOTOS AS EBAY WOULD ALLOW, BUT I MIGHT BE MISSING SOME PART. THEY ARE NOT BOXED UP YET, LOT OF THE ACCESORIES IS BUT PLEASE REVIEW THE AD, PHOTOS AND ASK QUESTIONS. THERE IS NO RETURNS. I DID HAVE A VIDEO. THE VALVE SPRINGS DID NOT MAKE IT IN THE ORIGIAL PHOTO WITH ALL THE STUFF. THE HEADS WILL BE SHIPPED KINDA MOCKED UP SO ITS A LITTLER CHEAPER FOR SHIPPING COST. THE SHIPPING IS GOING TO COST A LOT MORE THEN $45, I AM COVERING THE DIFFERNECE, HEADS WITH BE SHIPPED SEPERATLY AND A BOX WITH ALL THE EXTRA STUFF. SO 3 BOXES TOTAL.

Price: 2999.99 USD

Location: Faribault, Minnesota

End Time: 2024-09-13T20:22:25.000Z

Shipping Cost: 200 USD